How to easily create virtual machine with Hyper-V

In the technological world that surrounds us today, it is very easy to virtualize on computers that are used for any field, generally work. That is why many are the professionals who are dedicated to create virtual machines on computers with Windows operating system as if you had another machine.

In this case, in order to create a virtual machine, what you need is for your computer to have a Windows Server or 10 Pro system, Education and Enterprise. This is an important point because if you don't have one of those you can't use the Hyper-V program on your computer.

Next, we will show you how to build a virtual machine on your Windows computer and also how to configure it simply and quickly. So pay careful attention to the article that Citeia.com has prepared for you on this occasion.

How to create a virtual machine in Windows

Next we are going to show you everything you have to do to create your virtual machine in Windows so follow these steps so you can do it without any problem. If this article helps you, we invite you to share it with your friends or anyone you know who may benefit from reading it.

Activate the Hyper-V program in Windows

When we talk about Hyper-V we refer to the program that is incorporated in computers with Windows 10 or Server with which virtual machines can be run. This means that it is possible, with this program, to have two computers, for example, on a single physical computer and work on both independently.

The first thing to do to create a virtual machine in Windows is activate the Hyper-V program on the computer where we are going to develop the virtual machine. Once it is activated, we proceed to open it, and we find it among the programs that appear in the Windows Startup such as "Hyper-V Manager."

Within the program, look for "Action" among the options in the upper left bar, and then select "New" to click on "Virtual machine" to start with creation.

Specify the name, location and generation

In the first box that the program assistant places on the screen, you must give it a name to the virtual machine to be created and its location. Then click on the second option to "Specify generation", In it you must check box 2 if you have a firmware with UEFI and compatible with virtualization.

Specify RAM

In the next side option you have to specify RAM you want this virtual machine to have, for example 2GB for a 64-bit machine. On the other hand, you must also check the box below to "Use dynamic memory for this virtual machine" and click "Next".

Configure network functions and create a virtual hard disk

The other option is "Configure network functions" in which you must select "Default Switch" to be able to create a connection in "bridge mode" by making a configuration later.

The next step is "Connect a virtual hard disk", and if we do not have it, mark "Create a virtual hard disk" placing a required amount of GB.

Installation options

The last thing is the "Installation options" in which a box must be checked depending on the installation mode we want for our virtual machine. When all the steps have been completed then the wizard will inform you that it can now be installed on the computer.

To start the virtual machine installation go to "Virtual machines" and right click on the name of the machine you have created to select "Connect" and that's it.

Virtual machine installation failed and solution

There may be an error in the installation, which is due to the fact that you selected the "Generation 2" option and because of the activation of the mode. "Safe boot" this happens.

To solve it you have to deactivate it by turning off the virtual machine and accessing "Settings" to go to "Security" and cancel secure boot.

When the installation process is complete, you can then make the configuration that the machine needs to create the connection bridge with Hyper-V.

Configure the virtual machine by creating a bridge to connect to the router

The goal of configuring the virtual machine at this point is so that it is receive the IP address the router directly. Firstly, within Hyper-V, on your home screen you will see an "Actions" menu on the right side, where you must access "Switch Manager".

Then, select the "New" option within "New virtual network switch" and click on "Create Virtual Switch"; to be able to select the “Network Card” for the bridge.

At this point, you can select the new adapter that has been created from the "Configuration" of the machine and click on "Network adapter". Now, entering there, we look for the adapter created in the "Virtual switch" option, to then make sure that the direct IP address of the router is received.

Later you will have other options that you can configure in your virtual machine for its full operation, such as adding Hardware such as other hard drives. Also, you can configure the firmware or RAM of the machine, as well as its processor so that it is at the level of a good virtual machine.