Why won't my PS4 recognize my controller? - Fix this bug

Like all electronic devices, video games are exposed to failures and complications that can be solved easily. And most of all if these fouls are related to the equipment you need to play them, in this case the PlayStation 4.

It is also common that when wanting to play there are bugs or errors with the PS4 controls; however, they are errors that have a solution. For that reason, below we will show you why your PS4 does not recognize the controller and also how to solve this error.

Possible reasons why PS4 does not recognize my controller.

There are currently several reasons why a command of PS4 It does not recognize when connected by a USB, now we will see the solutions.

Keys locked

This mostly tends to be one of the problems more frequent command PS4 stuck or stuck keys because of this we do not have a good functioning. The reasons can be several but the first thing we must do is verify if the problem is not gambling, for that you can make sure by changing games.

Also, the reason may be dust or dirt on the inside of the button, to clean it you can use compressed air. And if your buttons do not return to their original place, it is best to visit Sony for service.

Battery failure

This inconvenience is also common mostly in the old commands, as batteries tend to wear out if you're not careful. But we must make sure, as it may also be that you have problems with your charger cable. To verify if that is the fault, you will only have to change the cable, so you will know if the problem is with the battery.

Unconfiguration of your device

It may happen that because of a update o reboot your console causes a misconfiguration, which is a fairly common failure, but there are several solutions.

Restart the console or the command and if you do not see a solution to the failure, check by entering the safe mode to the PS4 and connect the controller through a USB cable.

Connectivity Failures

If the wireless controller does not connect to your console, you will find a light shining intermittently, what you should do is restart the connection quickly and easily.

Do the following, disconnect the console and the router, so you would be causing a reboot. If this doesn't work, change the input ports on the router from your console.

What to do if the controller blinks and does not connect?

If this is the case, and you continue the connectivity failures in the reset button and it does not recognize the remote, use a needle or pin and hold for a few seconds to restart.

Reset the DUALSHOCK 4 control settings.

You must connect the ps4 gamepadUsing the USB cable to link the controller, this is an effective solution to connectivity failures. If you are unable to remedy the fault, we recommend contacting Sony technical support.

How should you sync the controller correctly?

If it only works with your USB cable, your problem is most likely syncing; To do this, we will continue to analyze other possible solutions for the synchronization problem:

Have a USB cable

It is recommended to have more than one USB that is compatible with the PS4, because as we have analyzed it is possible that we need it to know if its connectivity is good. Then connect the controller and the PS4 console with your USB. Once turned on, press the PS button that we find on the remote.

Turn on the console

When turning on, the wireless controller pairing starts automatically, be aware that updates or problems with the power supply may cause misconfigurations. 

Restart control from PS4

To carry out this process it is necessary to connect the PS4 controller via USB, keep in mind that the controller has enough charge, and verify that it is working properly. When the console is unplugged and off, and you're ready, plug in the console to turn it on, but don't forget to press the center key. If the reset has worked, the light will stop flashing.

The forced restart

If you want to force restart the wireless controller or DualShock 4, use a needle and insert it in its back right where it has a small hole. Press it and start a count of 1 to 10, and then reconnect and turn on your PS4. Performing this will match the command and it will work correctly. And if this does not happen, there may be some other serious problem in the remote.

Possible problems that can arise when synchronizing the controller.

The PS4 works both connected and wirelessly, right down to voice command. As we can see, it is a great alternative to spend time together and enjoy as a family. But to solve faults, keep reading.

When connecting the remote with its cable and it is not recognized, the error appears that you must solve by following these steps:

• You must press the Share button and the PS button at the same time, this allows the controller to be recognized. If it doesn't work try to change the usb cable, because the way you usually use it is not possible to be detected.
• Another way to solve this problem is to go to the console Play Station 4, and press the power key until you hear 2 beeps. That is to enter the Safe Mode of the PS4, of course, you must connect the controller with the USB cable. The next thing is to press the PS teak, and the control should respond, then it will direct you to the restart of the PS4, and then press the X key.

If the faults still persist and you cannot recognize the controller, disconnect the PS4 from the power source. This step means, for the PS4, that it will be in its sleep mode, and you will have to wait a few minutes to reconnect. Then press the console key until you hear 2 beeps, this is to enter safe mode and then perform the steps mentioned above.